Description
Areas of Applications:
Waterproofing of concrete and sand-cement mortar used in- Roof slabs and screeds
- External plastering
- Bathroom and Balconies
- Sumps and drains
Application Method:
- Charge cement and aggregates to concrete mixer as per the mix design, mix in dry state for 1-2 minutes.
- Start addition of 75%-80% mixing water & mix for 2-3 minutes.
- Professor Seal – ConcProof+ is added as per the recommended dosage into the remaining mixing / gauzing water, then add to concrete mixer & mix for another 2 minutes.
- Discharge the concrete / plaster for application.
- Cure the applied mortar or concrete as per good construction practices.
Technical Specifications:
- Appearance: Free flowing thin liquid
- Colour: Wine red colour
- Specific gravity @ 250C: 1.10±0.05 gms/cc
- Non-volatile content (%): 10±0.5%
- pH value: 11.0 – 13.0
- Setting times (minutes): Initial – 150: Final – 270 (IS 2645: 1975)
- Compressive strength: Equal to control (IS 2645: 1975)
- Chloride content: 0.006% (IS 2645: 1975)
- Water permeability: <40% of control (IS 2645: 1975)
