Application Areas:

• Dilute 1 part of Professor Seal – Roof Guard with 1 part of water and apply it as primer. This will cover 7 to 8 sq. mt. per litre of Elastomeric Roof Coating. Allow it to dry for 6 to 8 hours.
• Apply the first coat of Elastomeric Roof Coating without any dilution at the rate of 1.5 to 2 m2 per litre and allow it to dry before taking up the second and third coats. The rate of application is the same for all three coats
• For larger roofs, an open woven glass fabric mesh of should be sandwiched between the first and the second coat. While the 1st coat still wet, place the fabric mesh on it and ensure that it has complete contact with the coating. After the coat dries, start applying the 2nd coat of Elastomeric Roof Coating. This improves the ability of coating to resist movements in cracks in the substrate caused by variations in temperature.
• Inter-coat interval should be 6 to 8 hours.
• Allow the system to air cure for 7 days minimum. A total thickness of 1 to 1.2 mm must be achieved when Elastomeric Roof Coating is dry.
• 7 days after application of Elastomeric Roof Coating, it may be checked for its adhesion to substrate.