Product Instruction:

• TimberGrip Eco should be stirred well before use.
• Surfaces to be bonded should be free from oil, grease, dust and dirt & should be dry and properly leveled.
• Application should be lengthwise on one surface and breadth wise on other surface.
• Apply an even coat first on laminate & then on plywood.
• Do not allow adhesive to dry completely & bring both the surfaces in contact, align properly, & start pressing from one side by using cloth to avoid bubbles.
• Pressure to be given by using nails, clamps, weight, masking tape etc.
• Bonded surfaces are to be kept under pressure for 24 hours.