Description
Primary Uses:
- Paver Blocks
- Tiles
- Pre-cast concrete items
- Natural Stones
Application Method:
- Clean the surface with water jet or by wet scrubbing thoroughly to remove dirt, loose particles, etc.
- Apply one coat of Professor Seal – PB Seal & Shine by roller brush or spray on the prepared surface.
- Apply second coat of Professor Seal – PB Seal & Shine by roller brush or spray on the prepared surface after a gap of 20 minutes.
- Let the surface dry completely for at least 2-4 Hours.
- Special Note: There may be variation in tacky period due to atmospheric condition such as temperature, wind, and humidity.
Technical Specifications:
- Appearance: Clear to Sligh yellow Liquid
- Specific Gravity: 0.900 ± 0.100
- Air Entrainment: Negligible
- Drying Time: 3-5 minutes if sprayed & 8-10 minutes if applied by roller.
- Post Dry Appearance: Clear, Hard & Extremely Glossy.
